Bespoke chimney register plate 1.5mm galvanised metal folded Edges from £40 to £75.00

Bespoke chimney register plate 1.5mm galvanised metal folded Edges  from £40 to £75.00
Bespoke chimney register plate 1.5mm galvanised metal folded Edges  from £40 to £75.00 Bespoke chimney register plate 1.5mm galvanised metal folded Edges  from £40 to £75.00
Product Code: cus-001
Availability: In Stock
Price: £44.00

Available Options


* Dimensions:

* Hole Size:

* door:

* b (dimension back of plate to centre of hole in mm):

* c (edge of plate left to centre of hole in mm):

* d (plate width in mm):

* e (plate length in mm):

Qty:  
Made to Order galvanised steel woodburning stove chimney register plate with 40 mm folded down edges & pre drilled 6mm holes for fixing to inside of chimney. Comes with fixing screws & plugs.
 
Also included high temperature fire cement in a cartridge buff colour When measuring for your your plate its advisable to take at least 6mm off the width and length mesurement ,when the plate is screwed to the inside of the chimney fill in the gap around the plate with the fire cement some can also be placed around the rope seal and collar
 
WE ALWAYS MAKE THE PLATES AS PER THE DIAGRAM WITH THE COLLAR FACING UP INTO THE CHIMNEY THE VIEW OF THE DIAGRAM IS FROM ABOVE AS THOUGH YOU WERE LOOKING DOWN FROM THE CHIMNEY
 
Please use the drop down boxes to choose your soot door and flue hole options Please note the plates are priced up to a maximum size once you go over these measurements you must choose the larger size
 
Anything larger than the sizes stated are priced on request
To order: Please refer to the diagram above  and then enter your sizes in mm
 
 Measurement A is the flue hole size just choose this in the drop down box for flue holes
Measurements for Bespoke Plates a = hole size for flue pipe + 9mm for rope seal. Choose from:
• 4" (100mm) flue = 109mm
• 5" (125mm) flue = 134mm
• 6" (152mm) flue = 161mm
b = dimension back of plate to centre of hole
c = edge of plate left to centre of hole
d = plate width
e = length of plate
 
 

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Powered By OpenCart
Chimney Plates © 2020